Your automation, our passion.

+1.763.957.6000  |  HPD Support Login  |  Newsletter Signup

DeviceMaster ® EIP-2302

2-port DIN rail serial device server (RS-232/422/485) with two DB9 connectors and dual Ethernet ports to support your industrial EtherNet/IP gateway


Product Name Change Notification

Part Number: 99561-6

PortVision DXweb

 
  • DIN rail mountable
  • Two DB9 male serial ports (RS-232/422/485) with a minimum of 25KV of surge protection
  • Variable power input – 6-30VDC with a screw terminal connector
  • Dual RJ45 Ethernet ports to daisy-chain another network device
  • Provide PLC connectivity – to standard EtherNet/IP™ serial devices
  • Wide industrial operating temperature range (-37° to 74°C)
  • Software Controllable integrated 120Ω Termination Resistor for both the Transmit and Receive side in RS-422/485 Mode
  • PortVision DX – configure network settings for the DeviceMaster and monitor status, update firmware and if necessary, resolve issues remotely
  • Security features – SSL & SSH management, SSL serial data stream encryption
 

The DeviceMaster EIP-2302 provides connectivity from a wide variety of EtherNet/IP controllers and applications to a vast array of serial and Ethernet TCP/IP raw/ASCII devices. With this gateway, you can connect virtually any EtherNet/IP based PLC, SCADA, HMI, OPC Server or other controller to ASCII interface barcode scanners, RFID readers, printers, encoders, weigh scales, vision systems and many others.

DeviceMaster EIP-2302 embedded web pages provide many capabilities not found in standard gateways. It can be configured to most any environment in just minutes. Diagnostics pages greatly simplify maintenance and trouble shooting. System web pages provide the tools to update firmware, backup and restore configurations, and selectively restore defaults. Download PortVision DX, a remote management and network configuration application that makes it a simple task to detect and manage every DeviceMaster on the network. It can also be used to facilitate firmware updates, troubleshooting, and remote administration.


Includes:
  • DeviceMaster UP DB9 2-Port 2E
  • Loopback plug
  • Quick Installation card
 
Hardware
  • Bus Interface Specification 10/100 BASE-T
  • Memory
    • SDRAM 8 MB
    • Flash 4 MB
  • Enclosure UL94-V0 PLASTIC
  • Installation Method DIN Rail (35mm)
  • LED Indicators ETHERNET ACTIVITY, ETHERNET LINK, and STATUS
  • Dimensions 4.6" x 3.9" x 1.8"
  • Product Weight 6.5 oz
Electrical Specifications
  • Device
    • DC Input Voltage 6-30V
    • Current Consumption +24VDC 85mA
    • Power Consumption (maximum) 2.0 W
  • Power Input Redundancy Dual Redundant Power Input
  • ESD Surge ProtectionProvided minimum of 25KV protection for all serial lines. All Ethernet components are rated to 1.5KV magnetic surge protection.
Environmental Specifications
  • Air temperature
    • System On -37 to 74° C
    • System Off -40 to 85° C
  • Operating Humidity (non-condensing) 5% to 95%
  • Altitude 0 to 10000 Feet
  • Heat Output 6.8 BTU/Hr
  • MTBF (Mean Time Between Failures) 49.5 Years

Serial Communications

  • Connector Type DB9 Male
  • Number of Ports 2
  • Software Interfaces RS-232
    RS-422
    RS-485 2-Wire
    RS-485 4-Wire (Master/Slave)
  • Baud Rate 300 bps to 230.4 Kbps
    • Receive Buffer 1024bytes
    • Transmit Buffer 256bytes
  • Device Driver Data Control
    • Data Bits 7 or 8
    • Parity odd, even, or none
    • Stop Bits 1 or 2
    • Flow Control Hardware, Software, or None
Ethernet Specifications
  • Network Protocols ARP, BOOTP, DHCP, HTTP, ICMP, Ping, RARP, RFC 1006 (ISO over TCP), RFC 2217, SNMP (MIB-II), TCP/IP, Telnet, TFTP, and UDP socket services
  • Connector Type RJ45F Auto MDI/MDI-X
  • Industrial Protocols EtherNet/IP™
    Modbus/TCP
    PROFINET IO
Export Information
  • Packaged Shipping Weight 1.1lbs
  • Package Dimensions 9.25" x 2.5" x 7.25"
  • UPC Code 7-56727-99561-6
  • Country of Origin USA
  • ECCN 5A991
  • Schedule B Number 8471.80.1000

Features

  • SNMP Support MONITORING ONLY
  • Other Software FeaturesPortVision DX remote management
    Save/Load configuration files
  • Manufacturer's Warranty 5 Years
Regulatory Approvals
  • Emissions FCC Part 15 Subpart B: Class A limit
    AS/NZS CISPR 22
    European Standard EN55022
    Canadian EMC requirements
    ICES-003
  • Immunity EN55024
    IEC 1000-4-2/EN61000-4-2: ESD
    IEC 1000-4-3/EN61000-4-3: RF
    IEC 1000-4-4/EN61000-4-4: Fast Transient
    IEC 1000-4-5/EN61000-4-5: Surge
    IEC 1000-4-6/EN61000-4-6: Conducted Disturbance
    IEC 1000-4-8/EN61000-4-8: Magnetic Field
    IEC 1000-4-11/EN61000-4-11: Dips and Voltage Variations
  • Safety IEC 60950/EN60950 (LISTED)
    CSA C22.2 No. 60950/UL60950
  • Other Regulatory Approvals European Standard: RoHS 2 Compliant under CE
    NEMA TS2 COMPLIANT
    ODVA Certification
Pinout Diagram
  • Ground must be tied to signal ground.Pinout Diagrams
 
Find a Distributor

» Industrial Distributors
» North American Distributors
» International Distributors

Pre-Sales Questions

Comtrol's Pre-sales Team
For sales questions or to locate a reseller near you.

+1-800-926-6876 (1-800-Go Rocket)
+1-763-957-6000
Fax: +1-763-957-6001
sales@comtrol.com

Comtrol's Industrial Automation Sales
For sales questions or to locate an industrial distributor near you.

+1-800-926-6876 (1-800-Go Rocket)
+1-763-957-6000
Fax: +1-763-957-6001
sales@comtrol.com


 
Product Support and Service Information
Sales Support

Call +1.763.957.6000, or e-mail sales@comtrol.com

Technical Support

For technical assistance, our U.S.-based technical support team is only a phone call away.

Call +1.763.957.6000, or visit our forum at http://forum.comtrol.com/.

Warranty

Comtrol offers a 30-Day satisfaction guarantee and a 5-year limited warranty on all DeviceMaster UP family products! Extended Warranty Available.

Software & Drivers
» Comtrol FTP Site